Heavy Calibre Medium Frequency Heating Hydraulic Pipe Bending Machine
Machine content:
PLC:
Automatic operation,easy to operate,fast efficiency and save labors for whole pipe bender's operation. Support any language sites.
Shift arm:
Long layout design to achieve bends radius from 2D-10D even more.Centre Axis is important position to measure various bends radius.Pieces are casting and machining to get precise running when coordinated with PLC systems.
Support board:
Strong plate welded,mainly for rolling work piece. The supporter of Punching transformer.
Pushing board:
Clamp and fix the work piece, drive work piece go ahead or back return during machine working.Different diameter work piece's fixing by steel pads add and lock on Pushing board.
Cooling tower:
Good brand cooling tower provide enough cooling water flow out when machine working.
We supply high quality Ss Cs Steel Hot Pipe Bending Machine For Oil Pipelines And Profile Steel, induction heating pipe bending machine for Malaysia market.
Mechanical Design:
Solidworks And FEA Software design .
Control System:
SIEMENS PLC HMI SCADA.
Hydraulic System:
Solidworks
Induction Heating System
IGBT or SCR.
7×24 Hours After Service
| Max size | Model | Heating power | Cylinder capacity | Thickness |
| 6” | HYG-159 | 200KW | IDΦ140 ODΦ168 | 5-20 |
| 8” | HYG-219 | 200KW | IDΦ140 ODΦ168 | 5-20 |
| 12” | HYG-325 | 250KW | IDΦ180 ODΦ219 | 5-20 |
| 16” | HYG-426 | 350KW | IDΦ180 ODΦ219 | 5-20 |
| 20” | HYG-530 | 400KW | IDΦ180 ODΦ219 | 5-20 |
| 24” | HYG-630 | 500KW | IDΦ200 ODΦ245 | 5-20 |
| 28” | HYG-720 | 600KW | IDΦ200 ODΦ245 | 5-20 |
| 32” | HYG-813 | 800KW | IDΦ220 ODΦ273 | 5-20 |
| 36” | HYG-914 | 800KW | IDΦ250 ODΦ299 | 5-20 |
| 48” | HYG-1220 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
| 56” | HYG-1420 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
| 60” | HYG-1520 | 1000KW | IDΦ280 ODΦ325 | 5-20 |
| 64” | HYG-1620 | 1000KW | IDΦ320 ODΦ377 | 5-20 |
Bending technical parameters:
1. The bending pipe of the equipment adopts the raw steel pipe: seamless steel pipe, straight seam welded pipe or spiral welded pipe.
2. The bending radius of the bend must be greater than 2.5d (it is manufactured with elbow push technology below 2.5D), and the Angle of the bend should be intelligently controlled by programming (the Angle of the bend should be set arbitrarily within a certain range according to needs).
3, push the diameter of the elbow and wall thickness range: diameter 89 ~ 1420mm, wall thickness: 5 ~ 120mm (section design and manufacture of the equipment).
4. The stroke of the main oil cylinder is determined according to the maximum diameter and maximum bending radius of the elbow (provided by the user).
Product Tags:
|
|
Heavy Calibre 10D 6KW Hydraulic Pipe Bending Machine Images
|
