Manufacturing for pipe installation diameter 114 inch carbon steel stainless steel tee cold push tee machine
Tee forming machine technology is to use the tube blank as the raw material, by applying the liquid pressure in the tube cavity and applying the load in the axial direction, make it plastic deformation in the mold cavity, the tube wall and the inner surface of the mold, so as to obtain the forming technology of the required shape parts.Difficult for small size of fillet, molding products tend to adopt sectional pressure forming,namely first complete the expansion pipe, with smaller pressure line into a large rounded corners, have maintained uniform wall thickness at this time, then the pressure increase, forcing fittings mold joint, the rounded materials tensile deformation, the tube wall thinning, finally get the tee. Forming principle of three-way forming machine: first, put the tube blank into the lower die cavity, press the plunger push head into both ends of the pipe fitting under the action of hydraulic cylinder, so that the pipe fitting cavity is sealed, and then inject the liquid medium into the pipe fitting cavity through the liquid channel in the push head;At this point, the upper mold moves downward, forming a closed mold cavity together with the lower mold. Finally, the pressure of high-pressure pump and valve control liquid increases continuously, and the push head pushes the pipe fitting inward. The pipe wall deforms and gradually sticks to the inner wall of the mold, forming the tee.
| Specification | Unit | HYT-315 | HYT-500 | HYT-1000 | HYT-1500 | HYT-2000 | HYT-4000 |
| Tee OD range | lnch | 1~4 | 3~6 | 4~8 | 8~12 | 10~16 | 20~28 |
Master
cylinder | Normal force | KN | 3150 | 5000 | 10000 | 15000 | 20000 | 40000 |
| Work stroke | mm | 450 | 480 | 610 | 670 | 800 | 1200 |
| Go down speed | mm/s | 60 | 80 | 80 | 80 | 80 | 80 |
| Work forward speed | mm/s | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 | 8~12 |
| Return stroke speed | mm/s | 80 | 100 | 100 | 100 | 100 | 100 |
Side
cylinder | Normal force | KN | 3150 | 5000 | 8000 | 12500 | 18000 | 40000 |
| Work stroke | mm | 300 | 320 | 340 | 360 | 410 | 500 |
| Advance speed | mm/s | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 | 10~15 |
| Return stroke speed | mm/s | 60 | 60 | 60 | 60 | 60 | 60 |
Push-out
cylinder | Normal force | KN | 300 | 400 | 500 | 630 | 1500 | 2000 |
| Work stroke | mm | 300 | 300 | 400 | 450 | 550 | 700 |
Workbench
effective area | Right and left | mm | 550 | 750 | 900 | 1200 | 1400 | 1800 |
| Front and back | mm | 400 | 580 | 800 | 1000 | 1200 | 1500 |
| The max distance from slide block to workbench | mm | 190 | 250 | 370 | 460 | 520 | 650 |
| Center high of side cylinder | mm | 980 | 1100 | 1350 | 1800 | 1900 | 2500 |
| Motor power | KW | 30 | 45 | 74 | 110 | 220 | 330 |
Application:
It can apply for making stainless steel tee, carbon steel tee,
Features:
1. Hydraulic Tee Forming Press/tee making machine has rigid construction assures highly reliable operation.
2. Adopt Germany technology.
2. Special hydraulic circuit design improve working efficiency.
3. High efficiency and low noise hydraulic system can save energy and improve working environment.
4. User-friendly touch-screen panel provides easy operation and trouble-shooting.
5. The Safety inter-lock device assures perfect operator safety.
Product Tags:
|
|
114 Inch Carbon Steel Stainless Steel Tee Cold Push Tee Machine 30KW Motor Power Images
|
